[tothbastrolabs]

This follows indilib/indi-3rdparty PR #1408, which takes the driver to 1.2. The page changes with it.

• Telemetry describes the sensor module. What the fitted module measures decides which readings
  appear. Interface 1.2 adds Climate, which is humidity, dew point and the margin above the dew
  point, and Tilt, which is three axes of acceleration. The page also says what the smoothing does
  to them.
• A new Orientation section. It covers the tube's altitude and roll, why the roll is held near the
  zenith, which way round the module is assumed to be fitted, and how a level reference corrects a
  module fitted crooked. It also says when the reference is refused and where it is kept.
• Corrected wording. The fan targets need the infrared sensor; a module without one still measures
  the air. The Options and simulator paragraphs no longer say generation 4 exists only on interface 1.1,
  because the simulator now serves it on 1.2.
• The version row and scopelink.yaml read 1.2.

Screenshots. The Telemetry tab now scrolls, so it takes two pictures, both from a generation 4
controller on interface 1.2 with the humidity and tilt module fitted. telemetry.webp shows the top of
the tab: the temperatures, Climate, Tilt, Orientation and the level reference. The new
telemetry-diagnostics.webp shows the bottom, with the controller diagnostics the old caption described.
The rest of the set is unchanged, since nothing else on those tabs has changed.