[add-uos]

fix: correct fprintf escapes and add guard

1. Root cause: fprintf strings in DBusEnableInterface and
   DBusWakeupInterface used /n and /t instead of \n and \t,
   causing error messages to display literal characters
2. Fix: replace /n with \n and /t with \t in both files; add
   local size() < 2 guard before pathList index access
3. Impact: error messages now format with proper newlines and
   tabs; bounds guard prevents potential out-of-bounds access

Influence:

1. Test D-Bus connection failure error message formatting
2. Test wakeup device path with insufficient path segments
3. Verify normal D-Bus initialization has no regression

fix: 修正fprintf转义符并增加边界检查

1. 根因：DBusEnableInterface 和 DBusWakeupInterface 的 fprintf
   误用 /n 和 /t 代替 \n 和 \t，错误提示输出字面量不换行
2. 方案：将两处 fprintf 中 /n 改为 \n、/t 改为 \t；在
   pathList 索引访问前增加 size() < 2 局部边界校验
3. 影响：错误提示恢复正常换行和缩进格式；局部边界检查
   防止未来重构移除入口校验后的潜在越界访问

Influence:

1. 测试 D-Bus 连接失败时的错误提示格式
2. 测试路径分段不足时的唤醒设备处理
3. 验证正常 D-Bus 初始化流程无回归

Summary by Sourcery

Fix D-Bus error message formatting and prevent invalid wakeup-device path access.

Bug Fixes:

• Correct D-Bus connection error messages to render newlines and indentation properly.
• Guard wakeup-device path handling against insufficient path segments before indexing.

[sourcery-ai]

Sorry @add-uos, you've used your own review budget of 250,000 diff characters for the last 7 days.

You can request another review in 4 days and 18 hours by commenting @sourcery-ai review. Upgrade to get a review now.

[deepin-ci-robot]

[APPROVALNOTIFIER] This PR is NOT APPROVED

This pull-request has been approved by: add-uos

The full list of commands accepted by this bot can be found here.

Details

Needs approval from an approver in each of these files:

• debian/deepin/OWNERS

Approvers can indicate their approval by writing /approve in a comment
Approvers can cancel approval by writing /approve cancel in a comment

[sourcery-ai]

Reviewer's guide (collapsed on small PRs)

Reviewer's Guide

This PR fixes D-Bus connection error-message formatting by using valid newline and tab escapes, and hardens wakeup-device handling with a local pathList size guard before indexing.

Sequence diagram for guarded wakeup device configuration

sequenceDiagram
    participant Caller
    participant DBusWakeupInterface
    participant InputInterface

    Caller->>DBusWakeupInterface: setWakeupMachine(unique_id, wakeup)
    DBusWakeupInterface->>DBusWakeupInterface: pathList.size()
    alt pathList.size() < 2
        DBusWakeupInterface-->>Caller: return false
    else pathList has at least 2 segments
        DBusWakeupInterface->>InputInterface: call(SetWakeupDevices, busPath, state)
    end

Loading

Flow diagram for formatted D-Bus connection errors

flowchart TD
    A[Initialize D-Bus interface] --> B{"systemBus().isConnected()"}
    B -->|No| C[fprintf error with newline and tab escapes]
    B -->|Yes| D[Create D-Bus interface]

Loading

File-Level Changes

Change	Details	Files
Correct malformed escape sequences in D-Bus connection diagnostics so stderr output uses actual line breaks and indentation.	Replace literal /n and /t sequences with \n and \t in both initialization error messages. Preserve the existing guidance while making the formatted output readable.	deepin-devicemanager/src/EnableControl/DBusEnableInterface.cpp deepin-devicemanager/src/WakeupControl/DBusWakeupInterface.cpp
Add a local bounds check before deriving the wakeup device path from pathList.	Return false when fewer than two path segments are available before indexing pathList. Prevent potential out-of-bounds access during SetWakeupDevices handling.	deepin-devicemanager/src/WakeupControl/DBusWakeupInterface.cpp

---

Tips and commands

Interacting with Sourcery

• Trigger a new review: Comment @sourcery-ai review on the pull request.
• Continue discussions: Reply directly to Sourcery's review comments.
• Generate a GitHub issue from a review comment: Ask Sourcery to create an
  issue from a review comment by replying to it. You can also reply to a
  review comment with @sourcery-ai issue to create an issue from it.
• Generate a pull request title: Write @sourcery-ai anywhere in the pull
  request title to generate a title at any time. You can also comment
  @sourcery-ai title on the pull request to (re-)generate the title at any time.
• Generate a pull request summary: Write @sourcery-ai summary anywhere in
  the pull request body to generate a PR summary at any time exactly where you
  want it. You can also comment @sourcery-ai summary on the pull request to
  (re-)generate the summary at any time.
• Generate reviewer's guide: Comment @sourcery-ai guide on the pull
  request to (re-)generate the reviewer's guide at any time.
• Resolve all Sourcery comments: Comment @sourcery-ai resolve on the
  pull request to resolve all Sourcery comments. Useful if you've already
  addressed all the comments and don't want to see them anymore.
• Dismiss all Sourcery reviews: Comment @sourcery-ai dismiss on the pull
  request to dismiss all existing Sourcery reviews. Especially useful if you
  want to start fresh with a new review - don't forget to comment
  @sourcery-ai review to trigger a new review!

Customizing Your Experience

Access your dashboard to:

• Enable or disable review features such as the Sourcery-generated pull request
  summary, the reviewer's guide, and others.
• Change the review language.
• Add, remove or edit custom review instructions.
• Adjust other review settings.

Getting Help

• Contact our support team for questions or feedback.
• Visit our documentation for detailed guides and information.
• Keep in touch with the Sourcery team by following us on X/Twitter, LinkedIn or GitHub.

[add-uos]

Closing as duplicate of #887 (same fix, same target branch). PR #887 is the one being used for this fix.